Forklift Safety Cage


A forklift safety cage is necessary to ensure that workers are able to perform their job at elevated levels in a safe manner.

OSHA Approved Guidelines for Use of a Safety Cage on a Forklift

Workers often have to use a forklift to do repairs or work in areas that are high above floor or ground level. To maintain standards of safety, OSHA has approved a series of guidelines that must be followed when workers are lifted by a forklift in an OSHA approved safety cage. To read these guidelines click here.

A Description of a Forklift Safety Cage

Each forklift safety cage is built to hold two workers plus any equipment or tools that they need. The gates of the safety cage are made to open in an inward direction, never outward. Once the gates close, a spring tension latch holds them securely in place. A non-slip material is used on the floor of all forklift safety cages and there is a raised lip around the outer edge of the cage floor.

Attaching the Safety Cage

The safety cage attaches securely to the forks of the forklift using two safety pins. The pins lock the safety cage tightly into place behind the heels of each of the forks.

Load Limit

It is very important to check the load limit before you attach the safety cage to the forklift. The load capacity varies based on the manufacturer and model of the forklift. To check the load limit of a specific forklift, use the vehicle's manual to verify loading capacity. Always make sure to include the weight of the safety cage along with the weight of the people and tools that will be inside of the cage.

Safely Securing the Platform

It is imperative that the platform is attached securely to the forklift carriage or backrest. In certain instances, the platform is attached to both the carriage and the backrest. This is necessary to ensure that the forklift truck is capable of supporting the total weight of the safety cage and its contents. Once the safety cage has been secured to the forklift, it is very important that the forks do not move at all.

Body Harness

When workers are in a raised forklift safety cage, they must wear a fitted full body harness. The body harness must have the serial number and date of manufacture clearly visible. It should also be certified, not designated to comply with, ANZS 1891.1. It is important to inspect the body harness each time it is used. Even if it has not been used it still should be inspected every six months. Harnesses should not be used once they are ten years old based on the date of manufacture. The purpose of the full body harness is to spread the impact of an arrested fall over the load bearing body parts. The body harness is connected to the anchor point by one several methods including:

  • Rope
  • Web lanyards
  • Ladder sleeves
  • Rope grabs
  • Retracting lifelines

Types of Safety Cages for Forklifts

  • This safety cage for a forklift has two safety sleeves that are full length. There are internal handrails for safety to prevent crushed hands and fingers.
  • A stainless steel safety cage is made for outdoor use and for use in the chemical, food and pharmaceutical industries. The stainless steel checkered floor has edges that are turned down so water can flow off easily.

Final Thoughts

Following the proper guidelines and safety standards for forklift use ensures a safer working environment. Using a forklift safety cage prevents many injuries and deaths each year due to work place accidents.

Was this page useful?
Related & Popular
Forklift Safety Cage